Restoration after Water Damage

After your business experiences water damage from a leaky pipe, rainstorm or flood, you naturally want to get things back to normal as soon as possible. It is naturally. As far as you cannot take the time back, you need to find the way out. So, the disaster is near here. What is the full size of the water damage?

Restoration after Water DamageIf you’re dealing with anything other than a large incursion, you understandably may be considering handling the cleanup and drying yourself to save money or time. The problem is that restoration after water damage isn’t always as straightforward as it seems. So, here are 3 key things you need to be aware of when addressing water damage from a minor clean water (or Category 1) incursion.

1) Know What You’re Dealing With

The water damage can be caused by three different types of water, including:

Clean water (Category I)

Gray water (Category 2)

Black water (Category 3)

It’s important to understand the differences because Category 2 and Category 3 water present health risks to your employees and customers and need to be handled differently. The most likely sources of clean water would be water from a pipe, water heater, steam lines or even rainwater. The basic rule of thumb is that it should look and smell like tap water.

Recovering from Category 2 or Category 3 water damage or heavy flooding involves additional considerations that you shouldn’t do on your own.

2) Make Sure You Investigate All of the Damage

An important thing about restoration after water damage is finding the reason of it. Check the room to find something like a broken pipe or rainwater incursion. Usually, you can typically only see a small part of the actual damage. The majority of the moisture is often hidden in walls, and it’s critical to identify and dry all of the affected areas to prevent mold.

The methods for dealing with damage to walls depend on the type of materials and also what’s behind those materials. Drywall can often be salvaged, when you respond quickly to damage. If the wall has insulation, you will need to use flood cuts. If there is no insulation, then usually the best method is to create weep holes. You also need to pull and check your base molding and flooring materials. If you the floors are carpet, you may be able to pull back the wet area and dry it.

3) Establish Proper Airflow and Keep the Windows Closed When Drying

If you’ve found the moisture, your first instinct may be to open windows to help with the drying process. It is wrong. For example, if your building is mechanically ventilated, the systems need constant pressure levels to work correctly. You also want to avoid excess coolness or heat and humidity, or you may end up complicating the drying process.

Once you’ve taken away wet materials and established holes or cuts in the wall as needed, you’ll typically need one air mover for every 15 – 25 square feet of floor, unless the moisture load and density is particularly high, then you may need more. To prevent mold, make sure all of the layers and materials are dry before putting everything back together. You can take drying equipment for rent or call for professional cleaners. It is all about mold. It can be dangerous in case you’ve missed something.

The Process of Professional Water Damage Restoration

If the water damage has already happened in your house, you know how devastating it can be. If you’ve been trying to fix the situation on your own but there is no result, you need professional restoration after water damage.

Assessment and Inspection

The first thing that a restoration company will do is come to look at your flooded home. They will assess the water in your home or business and determine how much damage it did. It’s important to let professional water damage restoration company work in your home. Whether you have flood damage or a water pipe break, you may need more work done that you had thought. Parts of your building may need restoration and mitigation beyond what you can see, and professionals know how to assess these types of damage, too.

Restoration after Water Damage #1Getting the Water Out

The first step of water cleanup from flood damage or a water supply line break is to get the water in your home out. This means thoroughly drying out everything that got wet: flooring, walls, and even the foundation or the ceiling. The water cleanup process usually starts with vacuuming up as much water as possible. After that, the restoration company will work on drying up the water in your business or your home.

Cleaning Your Building

When you get water in your business or your home, whether it’s from a supply line break or is flood damage, you will need to clean everything affected by the water. Not only will it look dirty, but water can carry bacteria that you don’t want to keep around!

This means that, after drying, the next step in water mitigation is thoroughly cleaning anything that got wet. Your water cleanup restoration people will treat your carpets and walls with agents designed to kill all sorts of microbes. Depending on where you had water in your home or business, they may also use agents that will clean the air, so you can feel sure that you are breathing safely.

Finishing the Restoration

Once your water cleanup is complete, it’s time to restore your building. The process of restoration after water damage directly depends on the extent of the damage. If your flood damage as from a pipe break or a supply line break, you will need to be sure that your pipes are repaired, so you don’t face similar issues down the road. After all, you don’t want water in your business or home again! It’s important to make sure worthwhile to make sure that the work is completely done and your house is in safe.

Emergency Water Damage Restoration

Water Damage RestorationWater is essential for life. But, at the same time, water is element which can make a lot of troubles. Flood is the same dangerous natural disaster as fire and earthquake. But flooding can occur not only in the country or region, but also in your own apartment. This may be due to a broken pipe or a faulty washing machine in your apartment or in the apartment, which is located on the floor above. Such case always occurs suddenly, and it is important not to become puzzled, and immediately take the necessary steps, and then remove all the consequences of flooding. We have some advice for water damage restoration.

What happens in case of flooding your apartment and what must be done

When water penetrates into the apartment, you have a negative effect on all that is in it. Wallpaper and the material of wall and ceiling become wet if the water flows from the top. Water acts on the furniture, especially upholstered furniture. It can damage electrical equipment and cause a short circuit. The carpets became waterlogged, and it is highly undesirable for certain types of carpets. Moisture can damage the floor covering as parquet and laminate. Linoleum is resistant to moisture, but the water can get under it and accumulate there. Excess moisture can lead to mold which spoils household objects and has negative impact on human health.

In order to reduce the effects of apartment flooding to a minimum, you must act quickly and decisively. Of course, you must first remove the source of leakage. If flooding is very serious, an apartment must be disconnected from the mains supply to avoid short-circuiting. Next, you need to take steps to remove standing water from the premises. Most often the water is removing manually using cloths, buckets and mops.

When water is removed, the room should be dry. Wet carpets must be removed, and the furniture is carefully wiped. Later, during cleaning after flooding, be careful. Together with the water to your house can get pointed objects (for example, broken glass).

Water damage restoration

If flooding has occurred from above, then most likely, the ceiling will need to completely repair. If the ceiling is decorated with plastic panels or stretch film, the effects of leakage can be invisible after drying.

Wallpapers must be removed, they cannot be reused. If putty or paint at the walls has been swollen, it definitely needs to scrape with a spatula. Gypsum plasterboard after thorough drying can restore their properties. If sound-insulating or thermal insulation material lay inside the walls, it is necessary to check. May be, it will have to be replaced. All the surfaces damaged by water must be treated with preparations against mold.

For efficient drying, the wood floors can be removed several boards to ventilate the space under the boards. Fabric base linoleum becomes completely unusable caused by water, as well as the laminate. Linoleum without a fabric base must be removed and completely dry, and then it can be used again. Swollen parquet should be dismantled. Then, the floor must be dry, without a sharp rising of a temperature in the room.

Bathroom and toilet usually trim a tile that is not afraid of water. But if the water runs from beneath the tile, so under it there are voids and eventually mold may occur there. Such tile should be replaced.

Emergency Water Damage RestorationIs it possible to completely eliminate the consequences of flooding on their own?

If we successively consider all that needs to be done to completely eliminate the consequences of the apartment flooding, then the question should be answered in the negative. This can be seen by considering the content of each stage of work.

What is important in water damage restoration?

First of all, to remove the water from the apartment as soon as possible, but it is very difficult to do this, using buckets and rags. This requires professional equipment for pumping water. Drying is also very important. But for the drying rooms after the flood is not enough just to open the windows. This will necessarily lead to the appearance of mold. It requires quick-drying using heaters, which should be carried out professionally. In addition, it is necessary to remove the water from everywhere (for example, from beneath floor covering), and dry all the places where the water came.

If carpets and upholstered furniture became wet, it is likely that their professional cleaning and drying will be required. Removing the water from the suspended ceiling and bringing them in order requires a professional approach too. To determine the possible damage to electrical wiring it should be checked by a qualified electrician.

Therefore, the apartment owners, which suffered by flooding, do the right thing, if quickly call professionals who have everything they need to eliminate flooding results.

Emergency water damage restoration by professionals

Our company provides all the necessary services in order to overcome the consequences of the apartment flooding. Highly qualified and professionally trained specialists operate quickly and with high efficiency.

A thorough examination of the object is carried out to identify all the places where water has become numb. Photos of premises perform to use in future for determining the amount of damages.

The removal of water is performed by professional equipment. If necessary, some building structures (plasterboard, floor tiles, etc.) become dismantled. Effective equipment is used for drying facilities. With the help of professional equipment drying of damaged documents, electronic equipment, furniture, works of art is carried out, unless they are irretrievably damaged.

Disinfection is carried out as a preventive measure against mold and harmful bacteria that may penetrate into the apartment in case of flooding.

After the end of drying process, you can determine what additional work is needed (for example, cleaning of carpets and upholstered furniture, etc.).

If suddenly flooding of the apartment has happened as a result of an accident or natural disaster, the main thing is not to lose time, quickly do the most urgent steps and call the professionals who are able to perform the emergency water damage restoration. Turning to the services of our company, you will receive all necessary assistance.

-->